Skip to main content
Create Free Account

Free eBook & Checklist

No Plan, No Start. Then Check Every Worker.

What is your mine responsible for when contractors work on site, and what should you check before they start? This free 40-page eBook answers both, and shows what to keep.

  • 40 pages, PDF
  • 25-point pre-start checklist
  • Current to November 2026
  • Every source listed and dated
Page 2 of the guide: the short version in five numbered points, and the list of chaptersPage 10 of the guide: one system for the mine, every contractor inside it, with a photograph of a man reading a plan at a site office desk The cover of the ComplyFlow contractor compliance guide for mining: a worker in orange hi-vis and a hard hat holds a tablet on a mine site at dusk, with the processing plant behind, over the title in white and green
For coal, metalliferous, and extractive sites

Download

The Contractor Compliance Guide for Mining.

The fitters and electricians on a shutdown, the drillers, the haulage crews, and the cleaners, cooks, and security officers at the camp all work on the mine. What Australian law asks of mine and quarry operators when contractors work on their sites, and how to prove you met it.

  • The mining law in each state, and the contractor's plan
  • Statutory roles, competence, induction, fatigue, alcohol, and drugs
  • A 25-point pre-start checklist, an incident card, and a mine contractor map

40 pages, PDF, 3.1 MB. Current to November 2026. General information, not legal advice.

Free eBook

The Contractor Compliance Guide for Mining

Four quick details, then the 40-page PDF downloads straight away.

Then try it on your own contractors.

The Starter plan is free for up to 5 users and 5 sites. Or see the record the eBook describes in a demo.

The Film

The eBook in Just Over 2 Minutes.

The Mining contractor compliance eBook in a film of just under 3 minutes: who holds the duty, why it matters, what good looks like, and how to get there.

2 minutes 42 seconds. Captioned, with a voice-over. No sound needed.

Read the Film
  1. What is your mine responsible for when contractors work on site, and what should you check before they start?
  2. This guide answers four things: who holds the duty, why it matters, what good looks like, and how to get there.
  3. Safe Work Australia says the Australian Government does not regulate WHS in the mining industry; the states and territories do.
  4. So start with your state's law.
  5. Contractors do much of the work on a mine: the fitters and electricians on a shutdown, the drillers, the haulage crews, and the cleaners, cooks, and security officers at the camp and the gate.
  6. The duty does not move down the chain.
  7. A mine approves a contractor once. Its people then arrive at the gate every swing, and a shutdown can bring hundreds at once.
  8. The question an inspector asks: who was on site, and were they ready on the day?
  9. Queensland, Western Australia, and South Australia put one documented safety system at the centre of the mine, and Victoria asks the same of a prescribed mine.
  10. A contractor works inside it, under its own plan or, in Western Australia, by adopting the mine's. In Queensland and Western Australia, this is settled before the contractor starts.
  11. Competent, inducted, and fit, before the first task.
  12. Long shifts, long drives, rosters away from home, and a camp at the end of the day.
  13. Fly-in fly-out and drive-in drive-out crews sleep, eat, and recover at the camp, and contractors clean it, cook in it, and guard it.
  14. Protect life and start the emergency response first.
  15. Then the inspector or regulator hears by the route and clock your state sets, without waiting for anyone's approval or for every fact.
  16. At an open-cut coal mine in Queensland, the operator shuts its coal preparation plant for 12 days.
  17. On paper, each of these lives in a different folder.
  18. Joined up, the site senior executive sees on the first morning which plans are settled, who is inducted, authorised, and fit, and who is in the plant and the camp tonight.
  19. Take one site, fill in its contractor map on page 35, and run the checklist on pages 32 to 34 against its contractors.
  20. Every check in this guide has to work on the first morning of a shutdown, and on the quietest night shift at the camp.
  21. ComplyFlow is Contractor Management Software: the full contractor lifecycle, on one record.
  22. Get the free guide and checklist at complyflow.com.

What Is Inside

Twelve Chapters, From the Law to Every Gate.

Written for the people who run mines and quarries. Open a page to see it as it prints.

  1. 01The practical test: what you can show, at every gate
  2. 02Who holds the duty, and shared duties
  3. 03Officers: due diligence is personal
  4. 04Where the states differ: a mining law in each
  5. 05The mine's safety system, and the contractor's plan
  6. 06Statutory roles, competence, and induction
  7. 07Fit for the shift: fatigue, alcohol, drugs, health, and the camp
  8. 08On the day: what the paperwork will not show
  9. 09When something goes wrong
  10. 10A plant shutdown: five contractors and a labour hire agency
  11. 11The record, the checklist, and the contractor map
  12. 12One standard at every gate: questions to ask
Page 2 of the guide: the short version in five numbered points, and the list of chapters
Page 2 of 40: The Short Version
Page 10 of the guide: one system for the mine, every contractor inside it, with a photograph of a man reading a plan at a site office desk
Page 10 of 40: The Mine's System
Page 32 of the guide: the checklist to run before a contractor starts, each line tagged law, regulator, policy, or good practice
Page 32 of 40: The Checklist
Page 35 of the guide: the mine contractor map, a table to fill in with one row per contractor at every tier, and how to keep it true
Page 35 of 40: The Contractor Map
Get the Full eBook

Questions

Questions People Ask About the eBook.

Who is the eBook for?

Mine and quarry operators at coal, metalliferous, and extractive sites, in every state and the Northern Territory: the operations, safety, and contracts teams who engage contractors, and the officers who carry the due diligence duty. Victorian quarries are covered under the general OHS duties.

Does the WHS Act apply to a mine?

Mining has its own law in most states. Queensland's mines answer to two mining safety Acts instead of its WHS Act; Western Australia adds Mines Regulations to its WHS laws, and the NSW Resources Regulator lists a mines Act beside the NSW WHS Act; Victoria has a mines part in its OHS Regulations. The eBook starts by naming yours.

Can a contractor start before its plan is settled?

Not in Queensland or Western Australia. In Queensland a contractor gives the site senior executive its own safety and health management plan, and makes the changes asked for, before any work. In Western Australia a contractor does not start mining operations until its plan is accepted in writing, or it has reviewed the mine's system and given written notice.

Is the eBook free?

Yes. It is a 40-page PDF, free to download. Give us your name, company, and work email, and it downloads straight away.

Is this legal advice?

No. It is general information about the law as it stood when it was written, with every source listed and dated on the last page. For a decision about your own business, ask your own adviser.

How current is it?

It is current to November 2026. It follows Queensland's mining Acts as at 1 July 2026, Western Australia's Mines Regulations as at 11 November 2026, and the model WHS laws as at 5 December 2025; sources read 13 and 17 November 2026.

Check Once. Prove It on Every Shift.

The eBook shows what to hold for every contractor and worker. ComplyFlow keeps it on one record, checked once and current at every gate.

  • ISO 27001 since 2019
  • Sydney-based since 2009
  • Data hosted on AWS in Australia