Skip to main content
Create Free Account

Free eBook & Checklist

Let In Is Not Authorised. Check Every Access Point.

What is your authority or operator responsible for when contractors work on its network, and what should you check before they start? This free 37-page eBook answers both, and shows what to keep.

  • 37 pages, PDF
  • 24-point pre-start checklist
  • Current to November 2026
  • Every source listed and dated
Page 2 of the guide: the short version in five numbered points, and the list of chaptersPage 10 of the guide: maintenance on a live network is construction work, with a photograph of a roadside crew working behind cones beside traffic The cover of the ComplyFlow contractor compliance guide for infrastructure asset management: two workers in hard hats and hi-vis at an open roadside equipment cabinet, one holding a tablet, over the title in white and green
For road, rail, and water asset owners and operators

Download

The Contractor Compliance Guide for Infrastructure Asset Management.

The track gang, the traffic controller, the electrician at the pump station, and the security patrol at the depot all work on the network for its owner. What Australian law asks of road, rail, and water asset owners when contractors work on their networks, and how to prove you met it.

  • Who holds the duty, and when commissioning the work makes you the principal contractor
  • Maintenance on a live network, and the second law on a railway
  • A 24-point pre-start checklist, an incident card, and a corridor access map

37 pages, PDF, 10.4 MB. Current to November 2026. General information, not legal advice.

Free eBook

The Contractor Compliance Guide for Infrastructure Asset Management

Four quick details, then the 37-page PDF downloads straight away.

Then try it on your own contractors.

The Starter plan is free for up to 5 users and 5 sites. Or see the record the eBook describes in a demo.

The Film

The eBook in Just Over 2 Minutes.

The Infrastructure Asset Management contractor compliance eBook in a film of just over 2 and a half minutes: who holds the duty, why it matters, what good looks like, and how to get there.

2 minutes 35 seconds. Captioned, with a voice-over. No sound needed.

Read the Film
  1. What is your authority or operator responsible for when contractors work on its network, and what should you check before they start?
  2. This guide answers four things: who holds the duty, why it matters, what good looks like, and how to get there.
  3. The owner or operator is the business, and contractors' workers are its workers too.
  4. Most of the work on a road, a railway, or a water network is done by other businesses: the track gang, the traffic controller, the electrician at the pump station, the cleaner at the station, the security patrol at the depot.
  5. A night possession puts the rail operator, the track contractor, the signalling contractor, the traffic control company, and the road manager on one stretch of corridor.
  6. Maintenance on a live network is usually construction work, and often high risk.
  7. Where the asset is a railway, a second law applies.
  8. The Rail Safety National Law runs beside the WHS law, not instead of it.
  9. Under the model Regulations, the business that commissions a construction project is its principal contractor unless it engages another and authorises it to manage or control the workplace.
  10. And to discharge the principal contractor's duties.
  11. In regional NSW, a rail infrastructure manager renews the track through a level crossing on a public road over one weekend, under a contract worth AU$1.4 million.
  12. On paper.
  13. A labour hire worker arrives with a photo of a competence card nobody can check.
  14. The traffic plan is authorised, but one controller's card lapsed last month.
  15. Signing in at the access point lets a contractor onto the network. It does not authorise them to open a switchboard, enter a pit, or step into the corridor: that takes a second step, and a handback.
  16. A track worker is struck in a possession, or an excavator hits a water main at a level crossing.
  17. The WHS regulator, and on a railway ONRSR, may each need to hear, on different clocks.
  18. Take one corridor or maintenance contract, fill in its row of the access map on page 33, and run the checklist on pages 30 to 32 against its contractors.
  19. Every check in this guide has to work at every gate, staffed or not.
  20. ComplyFlow is Contractor Management Software: the full contractor lifecycle, on one record.
  21. Get the free guide and checklist at complyflow.com.

What Is Inside

Twelve Chapters, From the Duty to Every Access Point.

Written for the people who own and run road, rail, and water networks. Open a page to see it as it prints.

  1. 01The practical test: what you can show, at every access point
  2. 02Who holds the duty, and shared duties
  3. 03Officers: due diligence is personal
  4. 04Where the laws differ
  5. 05Working on a live network: traffic, services, and lines
  6. 06Rail safety law, and where road meets rail
  7. 07Owner, principal contractor, and long contracts
  8. 08Authorising and controlling the work
  9. 09When something goes wrong
  10. 10A weekend possession at a level crossing
  11. 11The record, the checklist, and the corridor access map
  12. 12One standard across the network: questions to ask
Page 2 of the guide: the short version in five numbered points, and the list of chapters
Page 2 of 37: The Short Version
Page 10 of the guide: maintenance on a live network is construction work, with a photograph of a roadside crew working behind cones beside traffic
Page 10 of 37: Working on a Live Network
Page 30 of the guide: the checklist to run before a contractor starts, each line tagged law, regulator, policy, or good practice
Page 30 of 37: The Checklist
Page 33 of the guide: the corridor access map, a table to fill in with one row per corridor, asset, or site, and how to keep it true
Page 33 of 37: The Corridor Access Map
Get the Full eBook

Questions

Questions People Ask About the eBook.

Who is the eBook for?

Road, rail, toll road, and water asset owners and operators, in every state and territory: the asset, maintenance, safety, and procurement teams who engage contractors, and the officers who carry the due diligence duty.

Is maintenance on a live network construction work?

Usually. Under the model WHS laws, repairing or maintaining a structure is construction work unless it is of a minor nature, and transport infrastructure is a structure. Construction work beside a road or railway in use by traffic is high risk construction work, which needs a safe work method statement before it starts.

Does rail safety law apply as well as WHS law?

Yes, where the asset is a railway. Under the Rail Safety National Law, the operator must ensure, so far as is reasonably practicable, that every rail safety worker, a contractor's included, is fit and competent, and a contractor carrying out railway operations must comply with the operator's safety management system as it applies to that work.

Is the eBook free?

Yes. It is a 37-page PDF, free to download. Give us your name, company, and work email, and it downloads straight away.

Is this legal advice?

No. It is general information about the law as it stood when it was written, with every source listed and dated on the last page. For a decision about your own business, ask your own adviser.

How current is it?

It is current to November 2026. It follows the model WHS laws as at 5 December 2025 and the Rail Safety National Law as at 26 May 2025, with its Regulations as at 1 July 2026; sources read between 5 and 12 November 2026.

Check Once. Prove It at Every Access Point.

The eBook shows what to hold for every contractor and worker. ComplyFlow keeps it on one record, checked once and current at every corridor and depot.

  • ISO 27001 since 2019
  • Sydney-based since 2009
  • Data hosted on AWS in Australia